Tray Wear pads

29Tray Wear Pads

Tray Wear Pad Kit:
Includes 2.8” long x 1” wide x 0.5” thick UHMW pad with two counter sunk drilled holes, two ¼” -20 flat head screws, and one “diamond” shaped nut plate. Pad mounts on bottom of tray and is held in place with screws that go through pad and tray and thread into the nut plate that is positioned on the top of the tray. If pads are ordered with tray, Pax will add holes to tray for the flat head screws (standard position for these holes are 4” from end of the tray that is opposite the end to which the tray mounting brackets are connected).