|
Standard Spray
Assembly
|
The standard
spray assemblies include the nozzle body, selected tip,
check valve, retainer nut, quick connect male plug,
and 8 feet of 1/4" plastic tubing.
|
|
Description
|
Part No.
|
| H.P Spray Assembly
w/ Soft Tubing (Polyethylene) |
06-3009-30
|
| Above Assembly
w/Piston Nozzle* |
06-3102-30
|
| H.P. Spray Assembly
w/ Hard Tubing (Nylon) |
06-3010-30
|
| Above Assembly
w/ Piston Nozzle* |
06-3101-30
|
| H.P. Low Volume
Spray Assembly (1/8"
Tubing) |
06-3019-30
|
*Piston nozzle recommended for
light viscosity lubricants.
|
|
|
Magnetic Base Spray
Assembly
|
The magnetic base spray assembly includes 250 lb. pull magnet w/ steel post,
stainless steel tube, clamp assembly, nozzle body, selected
tip, check valve, retainer nut, quick connect male plug,
and 8 feet of 1/4" plastic tubing.
|
|
Description |
Part No.
|
| H.P. MBSA w/
Soft Tubing (Polyethylene) |
06-3013-30
|
| Above Assembly
w/ Piston Nozzle* |
06-3103-30
|
| H.P. MBSA w/
Hard Tubing (Nylong) |
06-3014-30
|
| Above Assembly
w/ Piston Nozzle* |
06-3104-30
|
| H.P. MBSA - Low
Volume (1/8" Tubing) |
06-3023-30
|
*Piston nozzle recommended for
light viscosity lubricants.
|
|
|
 |
Flextube Magnetic
Base Spray Assembly
|
The flextube magnetic
base spray assembly includes 250 lb. pull magnet w/
release lever, flextube segments, nozzle body, selected
tip, check valve, retainer nut, quick connect male plug,
and 8 feet of 1/4" plastic tubing.
|
|
Description |
Part No.
|
| H.P. Flextube
MBSA w/ Soft Tubing
(Polyethylene) |
06-3017-30
|
| H.P. Flextube
MBSA w/ Hard Tubing
(Nylon) |
06-3018-30
|
| H.P. Flextube
MBSA - Low Volume (1/8"
Tubing) |
06-3022-30
|
|
|
|
 |
Note: High
Pressure (H.P.) assemblies are used with pre-pressurized systems -
serial numbers 5700 and later. Also used with retrofitted systems.
Copyright (c) 2004 Pax Products, Inc.
|