Spray Assemblies, Nozzles and Tips
The standard spray assembly includes the nozzle body, spray tip, check valve/strainer, retainer nut, quick connect male plug, and 8 feet of 1/4" nylon tubing.
Standard Spray Assembly
Description Part No.
Standard Spray Assembly 06-3008-30
Magnetic Base Spray Assembly
The magnetic base spray assembly includes 250 lb. pull magnet w/steel post, stainless steel tube, clamp assembly, nozzle body, selected tip, check valve/strainer, retainer nut, quick connect male plug and eight feet of 1/4" nylon tubing.
Description Part No.
Magnetic Base Spray Assembly 06-3012-31
Flextube Magnetic Base Spray Assembly
The flextube magnetic base spray assembly includes 250 lb. pull magnetic w/release lever, flextube segments, nozzle body, selected tip, check valve/strainer, retainer nut, quick connect male plug and eight feet of 1/4" nylon tubing.
Description Part No.
Flextube Magnetic Base Spray Assembly 06-3016-30
Spray Nozzle Assemblies
Spray nozzle assemblies include nozzle body, check valve/strainer, selected spray tip and tip retainer.
Nozzle Assembly
(1/8" NPT Female Threads)
PN 06-3001-30
Nozzle Assembly
(1/8" NPT Male Threads)
Nozzle Assembly
(1/4" Compression Sleeve & Nut)
PN 06-3002-30
PN 06-3003-30
Spray Tips
Please contact Pax Products for information about tips not shown.
Style & Type Pattern Size Part No.
25° Flat 1.50" x 3.50" 06-0973-20
50° Flat 2.00" x 5.75" 06-0951-20
65° Flat 2.00" x 7.50" 06-1908-20
80° Flat 2.00" x 9.50" 06-0950-20
95° Flat 2.25" x 12.00" 06-1909-20
110° Flat 2.50" x 14.00" 06-0952-20
.041" Orifice Deflection 4.00" x 18.00" 06-0956-20
Flat Tip
Deflected
Flat Tip
Note: Pattern size obtained by using a low viscosity lubricant. Tips were placed in the vertical position and held 6" from the surface. Pattern sizes may vary depending upon lubricant viscosity and air pressure setting.