|
Spray Nozzle Assemblies
|
| Spray nozzle assemblies include nozzle body, check valve,
choice of spray tip, and tip retainer. |
|
Description |
Part No. |
| H.P. Nozzle (1/8" NPT Female
Threads) |
06-3004-30 |
| H.P. Nozzle (1/8" NPT Male
Threads) |
06-3005-30 |
| H.P. Nozzle (1/4" Tubing
Compression Nut & Sleeve) |
06-3006-30 |
| Piston Nozzle* (1/4" Tubing
Compression Nut & Sleeve) |
06-3100-30 |
*Piston nozzle recommended for light viscosity
lubricants. |
|
 |
 |
 |
 |
|
06-3004-30 |
06-3005-30 |
06-3006-30 |
06-3100-30 |
|
Spray Tips
|
| Please contact Pax for information about tips not shown. |
|
Style |
Type |
Pattern
Size |
Part No. |
| Flat |
25° |
1.50" x 3.50" |
06-0973-20 |
| Flat |
50° |
2.00" x 5.75" |
06-0951-20 |
| Flat |
65° |
2.00" x 7.50" |
06-1908-20 |
| Flat |
80° |
2.00" x 9.50" |
06-0950-20 |
| Flat |
95° |
2.25" x 12.00" |
06-1909-20 |
| Flat |
110° |
2.50" x 14.00" |
06-0952-20 |
| Deflected |
.041" Orifice |
4.00" x 18.00" |
06-0956-20 |
| Cone |
.020" Orifice |
3.50" Diameter |
06-0958-20 |
| Cone |
.024" Orifice |
4.25" Diameter |
06-0953-20 |
| Cone |
.030" Orifice |
5.50" Diameter |
06-0959-20 |
|
|
|
|
|
|
Flat Tip |
Cone Tip |
Deflected Flat Tip |
|
Note: A low viscosity (Tellus
#10) lubricant was used to obtain the pattern sizes described. The tips
were placed in the vertical position and held 6" from the surface with an
air pressure setting on the FRL of 35 psi. Pattern sizes may vary
depending upon lubricant viscosity and air pressure setting.
Copyright (c) 2004 Pax Products, Inc.
|